Master cylinder heat shield Fits most Mopar
master cylinders
Floor Pan Bracket (Stainless)
Stainless floor pan bracket, left or right side, fits A, B, & E
Body
(ACC-4001)
E-Body Stainless Muffler/S-bracket Assembly
(ACC-4002)
Gasket Kit, 71-74 A-body
340-360 applications used
one left gasket and no gasket on right hand side. This kit
supplies 2 short and 2 long bolts, nuts and one HP gasket. (ACC-GK-A) |
HP Gasket Kit, This kit is used on all HP manifolds; A,
B, C and E body applications. Comes with 2 fire
ring gaskets, 4 nuts & zinc bolts (ACC-GK-HP) |
| Max Wedge Gasket Composite steel gaskets for blowout resistance. 4 bolt (ACC-13757) |
HP
Fire Ring Gasket for all HP manifolds. Double
sealing design. Single or box of 10
(ACC-13044) |
| Zinc Coated Clamps, 2", 2 1/4" or 2 1/2". Use these clamps in place of regular clamps that rust. |
| Clamps 1 7/8", 2", 2 1/4", 2 1/2" |
| Square Washer A square dimpled washer used for many tail pipe hangers. The design keeps the hanger from rotating and abrasion. |
| Mopar Flange, HP The Mopar flanges that Accurate LTD stock are proper in design and appearance. The 2.50" flanges are 3/8" in thickness. These are correct for all the HP manifolds requiring a welded flange. (ACC-3103) |
| Floating Flange 2" (ACC-15007) |
|
LP Flange 2 1/4"
This is the flange that is used for the LP or standard non-HP
exhaust manifolds. These are to be used for 2" to 2-1/4" pipe.
Bolt pattern is narrower than the HP flange. They are proper in
design and appearance. (ACC-109)
|
Proportioning Valve Heat Shield Replaces the factory piece on 67-69 Big Block A-body cars. Made of 304
stainless and is required to protect the brake proportioning valve from
overheating because of the exhaust manifold location.
Stainless Tips Hangers to go with your Stainless Tips!
Ball Joint Collector Kit (Pair) will enable to hook two pipes together with the adjustable ball joint connection. (ACCBJ)
Pair of Header Reducers 2 1/4", 2 1/2", or 3" Heavy 14 gauge material that will not burn out as the thinner styles. Comes as a kit with flanges, gaskets and bolts which are also made of heavy gauge material. (ACCRD-2.25, ACCRD-2.5, ACCRD-3.0)