A-Body B-Body E-BodyTipsMisc. PartsHangersComplete SystemsContact UsShopping Cart

 

Home

Sound Clips

H-Pipe Info Page

Tom's Big Block

Mopar Shows

Comment Page

Links

Return Policy

 

 
D-70 Muffler Hangers for ACM-6997 Muffler  Heavy duty design, goes with TA/AAR mufflers.  Order with D-70TA-AAR muffler straps.
D-70TA-AAR Muffler Straps for TA/AAR Mufflers for our ACM-6997 mufflers.  Order with D-70 hangers.
  Stainless Tip Hangers Don't forget your tip hangers for your stainless exhaust tips.

D-738,
D-739		 Hanger, C-body, 60-61
D-737 Hanger, B-body Main Support, Double Loop Design  This is the hanger found on Hemi and some 6 pak applications. 

Now in Zinc

 
  D-741 Hanger, A-body tailpipe This is the most common hanger that fits most A bodies and holds up the tail pipe, right or left with turndowns.
D-743

Hanger, B-body '62-'65 tailpipe Original replacement for most applications.
D-747 Hanger, A-body, 65-73  A body hanger, '65-'73  For 1.5" pipe

Some Slant 6 applications

D-753 & D-757 Hanger, C-Body, '67-73, (right side)  Hard to find main support hanger that mounts up by the shock absorber for dual exhaust cars.    

Hanger, C-Body, '67-73 (left side) 

 
D-755 Hanger, Main Support  Fits most A & B body applications with 2.25" mufflers. Replaces the factory single-strap hangers. 

Now in Zinc
D-756 Hanger, B body tail pipe '68-'74 Used with turndown tailpipes. This is the hanger that bolts to the inside of the rear frames and supports the tail pipes.

Now in Zinc
D-759 Hanger, C-body, 67-73 right side main support hanger for single exhaust application.  Mounts at shock absorber cross member. 
D-761 Hanger, E-body, 70-73

Now in Zinc
D-762 Hanger, E-body, 70-71 (without tips)
ACC-148,
ACC-149		 Hanger, B-body '66-'67 Tail Pipe (right side ACC-148) These are the hard-to-find tail pipe hangers that are found on '66-'67 only B-body cars.

Hanger, B-body '66-'67 Tail Pipe (left side ACC-149)

ACC-2001 Hanger, Hi-Po Resonator/tip, A-body Cuda & Dart Comes with mounting hardware, including the special square washers. 
D-755-E Hanger, Main Support or Resonator Hanger Fits '70 E Bodies, both sides & '71-'72 LEFT side. This bolts to the floor pan brackets mounted to the car above the resonators. 
Item 46 Hanger, main support or tail pipe An excellent universal hanger with many configurations possible. Use in the place of factory hangers. 
D-746 Hanger, main support, A & B body with 1 7/8" mufflers 

 Now in Zinc

 
D-792,
D-792-3		 Hanger, Main support, Double Loop  Main support hanger for larger non-factory pipe sizes. Bolts directly to floor pan brackets in the place of the factory hangers. Comes in 2.5" and 3". This is of the heavier duty double loop design.

Now in Zinc
D-768 Hanger, Main Support, Right Side for '71-'74 B body/'71-'74 E body  RS hanger, late 71-74, attached near the shock absorber.  Can be used on 74 left side with slight modification.